home *** CD-ROM | disk | FTP | other *** search
/ Collection of Tools & Utilities / Collection of Tools and Utilities.iso / comm / us96setu.zip / HSTPCBQM.DOC < prev    next >
Text File  |  1987-06-22  |  10KB  |  324 lines

  1.  
  2. HSTPCBQM.DOC                Original Release 1.0                       06/22/87
  3.  
  4.  
  5.  
  6.  
  7.         USR Courier HST usage with PCBoard 11.8a/E3 and with Qmodem 3.X
  8.  
  9.     by Dave Schubert, The Casino PCBoard BBS (609)652-6030 Atlantic City, NJ
  10.  
  11.  
  12.  
  13. Overview
  14.  
  15. This document provides step-by-step information to initialize your HST
  16. modem to compatible values with other PCBoard System Operators (SYSOPs).
  17. If you are not a PCBoard SYSOP, you can still use the Qmodem setup values
  18. to ensure compatibility and optimum performance.
  19.  
  20.  
  21.  
  22. Objective
  23.  
  24. Upon completion of these procedures, your PCBoard will answer the phone
  25. line at 19,200 bps and handle all baud rates 300 through 19,200.  Your
  26. callers log and user logon response will also reflect their correct baud
  27. rate even though the modem will be connected at a fixed rate of 19,200
  28. bps.  This feature is part of PCBoard reading the "CONNECT XXXX' statement
  29. from the modem upon connection.
  30.  
  31. Also upon completion, your Qmodem 3.X (3.0 or 3.1) will be able to
  32. call out to any and all BBS systems of any baud rate, and work correctly.
  33.  
  34.  
  35.  
  36. Using This Procedure
  37.  
  38. To use this procedure, first load QINSTALL.COM, which is the install
  39. program for Qmodem.  Once the values match the examples below, you will
  40. then be able to initialize your modem correctly so that it will be
  41. easily switchable between PCBoard and Qmodem.  Each section must be
  42. followed in sequence.  ASSUME NOTHING.  All steps are explicit.  I'll
  43. be happy to explain my reasons for any of the commands indicated.
  44.  
  45.  
  46. HST Physical Switch Settings
  47.  
  48. It doesn't matter how your modem came set when you received it.  The
  49. values indicated here guarantee compatibility.  Basically, all switches
  50. are up ("on") except for switches number 3, 5, and 8.
  51.  
  52.                  +--------+   +-------------------+
  53.               ON    U  P       U U . U . U U . U U  ON                 
  54.              OFF               . . D . D . . D . .  OFF
  55.                  +--------+   +-------------------+
  56.                                1 2 3 4 5 6 7 8 9 1
  57.                                                  0
  58.  
  59.  
  60.                                                           HSTPCBQM Page 1
  61.  
  62.  
  63.  
  64.  
  65.  
  66.  
  67.  
  68. Section 1.0  Qmodem Initialization
  69.  
  70. The following is EXACTLY what you should have upon loading Qinstall, and
  71. the subsequent commands will take through each required step.
  72.  
  73.  
  74.  
  75. Qinstall - Installation Program for Qmodem SST v3.1
  76.  
  77.  
  78.          1) Cosmetics     : Colors & Windows
  79.          2) Hardware      : Communication parameters
  80.          3) Directories   : File and Path Name parameters
  81.          4) RunTime Setup : Set Defaults for many features
  82.          S) Save & Exit   : Save Configuration and Exit to DOS
  83.          Q) Exit to DOS   : No Changes Saved
  84.  
  85.  
  86. Option >2
  87.  
  88.  
  89.  
  90. Qinstall - Hardware : Modem & Port Setup
  91.  
  92.          1) Modem Setup #1   Modem Initialization and Timing
  93.          2) Modem Setup #2   Modem Return Codes and Commands
  94.          3) Port  Setup      Comm Port Addresses and IRQs
  95.  
  96.  
  97.          X) Exit back to Main Menu
  98.  
  99.  
  100. Option >1
  101.  
  102.  
  103.  
  104. Qinstall - Modem Communication Parameters
  105.                               Baud       Data   Parity   StopEnter initial Modem settings  [19200]    [8]     [N]     [1]
  106.  
  107. String to send BEFORE changing Baud rate [              ]
  108.  
  109. String to send AFTER changing Baud rate  [{             ]
  110.  
  111. How many seconds should I wait between Redial attempts [10   ]
  112.  
  113. How many seconds should I wait before Cancelling a call [55  ]
  114.  
  115. How many milliseconds should be inserted between each character
  116.     when sending the "Dial" command to the modem [0    ]
  117.  
  118. What Comm port is your modem attached to [1-8] [1]
  119.  
  120.  
  121. (Press F10 to accept changes and return to previous screen)
  122.  
  123.  
  124.  
  125. Qinstall - Hardware : Modem & Port Setup
  126.  
  127.          1) Modem Setup #1   Modem Initialization and Timing
  128.          2) Modem Setup #2   Modem Return Codes and Commands
  129.          3) Port  Setup      Comm Port Addresses and IRQs
  130.  
  131.  
  132.          X) Exit back to Main Menu
  133.  
  134.  
  135.  
  136. Press F1 for Help, F10 to Accept changes, or Esc to Exit
  137.  
  138. (Press F10 to accept changes and return to previous screen)
  139.  
  140.                                                                                Qinstall - Modem Dial and Redial Parameters                                    
  141.  
  142. Message your modem returns when connected . . . . . . . [CONNECT       ]       
  143. Four messages your modem returns when Dialing was unsuccessful                   [NO CARRIER    ]    [BUSY          ]    [NO DIAL TONE  ]    [NO CONNECT    ] 
  144. Text sent to cancel a Redial attempt  . . . . . . . . . [{{{           ]       
  145. Text received that cancels a Redial attempt . . . . . . [OK            ]       
  146. Modem Initialization text . . [ATZ{                                    ]
  147. Modem Dial Prefix [ATDT          ]    Modem Dial Suffix [{             ]       
  148. Text sent to Hang up the Modem  . . . . . . . . . . . . [~~+++~~ATH{   ]       
  149. Character (if any) to be sent twice in XMODEM transfers [  ]                   
  150.  
  151. Press F1 for Help, F10 to Accept changes, or Esc to Exit
  152. (Press F10 to accept changes and return to previous screen)
  153.  
  154.  
  155.  
  156.  
  157. Qinstall - Installation Program for Qmodem SST v3.1
  158.  
  159.  
  160.          1) Cosmetics     : Colors & Windows
  161.          2) Hardware      : Communication parameters
  162.          3) Directories   : File and Path Name parameters
  163.          4) RunTime Setup : Set Defaults for many features
  164.          S) Save & Exit   : Save Configuration and Exit to DOS
  165.          Q) Exit to DOS   : No Changes Saved
  166.  
  167.  
  168. Option >S
  169.  
  170.  
  171. (Now you have saved your new default values to Qmodem.cnf and you can call
  172. Qmodem itself to get the modem ready.)
  173.  
  174.  
  175.  
  176.  
  177. Section 2.0  Default Modem values.
  178.  
  179. The US Robotics Courier HST comes with factory defaults.  To get back to
  180. these values you must enter AT&F to restore to these original values.  Even
  181. if you have never done AT&W command, do so now to ensure proper baseline
  182. values.
  183.  
  184. The following example graphically displays the procedure used while in
  185. Qmodem.  You should be able to type ATI4 at any time to get the current
  186. values for the modem.
  187.  
  188.  
  189. AT&F
  190. OK
  191. ATI4
  192. USRobotics Courier 9600 HST Settings....
  193.  
  194.    C=1  E=1  F=1  M=1  Q=0  V=1  X=1  B=1
  195.    BAUD=19200  PARITY=N  WORDLEN=8
  196.    DIAL=PULSE  ON HOOK    TIMER
  197.  
  198.    &A1  &B0  &G0  &H0  &I0  &M4
  199.    &N0  &P0  &R1  &S0  &Y1
  200.  
  201.    S00=000  S01=000  S02=043  S03=013
  202.    S04=010  S05=008  S06=002  S07=030
  203.    S08=002  S09=006  S10=007  S11=070
  204.    S12=050  S13=000  S14=001  S15=000
  205.    S16=000  S17=000  S18=000  S19=003
  206.    S20=000  S21=010  S22=017  S23=019
  207.  
  208. OK
  209.  
  210. (Now make the following commands to get your modem to the new default values)
  211.  
  212.  
  213. ATX4 &B1 &H1 &R2 &S1 &W
  214. OK
  215. ATI4
  216. USRobotics Courier 9600 HST Settings....
  217.  
  218.    C=1  E=1  F=1  M=1  Q=0  V=1  X=4  B=1
  219.    BAUD=19200  PARITY=N  WORDLEN=8
  220.    DIAL=TONE   ON HOOK    TIMER
  221.  
  222.    &A1  &B1  &G0  &H1  &I0  &M4
  223.    &N0  &P0  &R2  &S1  &Y1
  224.  
  225.    S00=000  S01=000  S02=043  S03=013
  226.    S04=010  S05=008  S06=002  S07=030
  227.    S08=002  S09=006  S10=007  S11=070
  228.    S12=050  S13=000  S14=001  S15=000
  229.    S16=000  S17=000  S18=000  S19=003
  230.    S20=000  S21=010  S22=017  S23=019
  231.  
  232.  
  233. Reviewing the commands for this section:
  234.  
  235.      AT&F                       Restores modem to factory default values
  236.      ATI4                       Displays current values (factory default)
  237.      ATX4 &B1 &H1 &R2 &S1 &W    Write new default values to modem NRAM
  238.      ATI4                       Displays current values (your default)
  239.  
  240.  
  241.  
  242. Section 3.0  PCBoard 11.x Modem Initialization
  243.  
  244.  
  245. Below are the "Modem Data" screen from PCBoard Setup (PCBSETUP.EXE) which you
  246. must set to match EXACTLY on the "Modem Initialization String" and the
  247. "Modem Off-Hook String".  All other values are at your own discretion.  The
  248. values shown are from my system here in Atlantic City.
  249.  
  250. ╔══════════╦═══════════════════════════════════════════════════════╦══════════╗
  251. ║ 06-21-87 ║                      Modem Data                       ║ 22:33:30 ║╚══════════╩═══════════════════════════════════════════════════════╩══════════╝
  252.  
  253.    Seconds to wait for Carrier: 15       (5 to 60 Seco